by Michael Farthing | Jul 30, 2018 | electronics, Posts
Live Electrical Work is now prohibited in WA. Many pump starters used in underground mining require you to perform Live Electrical Work just to adjust the Stop Current for the pump. Live Electrical Work is NOW (as of May 2018) generally prohibited in Western...
by Jim Dwyer | Mar 11, 2018 | electronics, Posts
Monitor & Control Underground Mine Pumps! Submersible pumps are frequently used in underground mines and installing mine pumps is not a challenging task. Pump installation may not be a challenge but management of mine sumps has frustrated mine operators for years....
by Michael Farthing | Sep 13, 2017 | electronics
I’ve created a guide to designing a pump starter for Maximum Safety and Pump Reliability. You don’t need to do these things to use the SC10, but here are some tips to get the most out of it to maximise the performance and safety of your dewatering pumps. Pump...
by Michael Farthing | Jul 11, 2017 | electronics
A pump left in manual will run dry. Seals will overheat and eventually fail. The majority of submersible pump starters have a manual/automatic switch to bypass the pump controller automatic mode. Subsequently pumps are often left running long after the sump has been...
by Jim Dwyer | Dec 12, 2015 | electronics, Posts
SC10 Hazard Eliminator Pump snore controllers don’t appear to be an item that may harm anybody and once installed and commissioned are not likely to, however the installation and commissioning process requires most products to be setup while the electrical...